Page 1 of 1

how many cycles

Posted: Wed Sep 10, 2008 10:08 pm
by intertel
hey all

i fly a hulk with to cargo rigs and one cargo expander II and a mining laser upgrade in the lower slots

right now i go out for 7 cycles before i have to return full.

how many cycles do you all get that put in 2 of the cargohold expaners II int he low slots?

Posted: Thu Sep 11, 2008 11:32 am
by Minalotta
9-10 cycles at a 90 sec interval. I also run cargo rigs and I need 11 cycles to fill it. This is with t1 strips.

Posted: Thu Sep 11, 2008 5:04 pm
by miner81
I got 3 cycles at 190secs reset lasers.

My Hulk config

T1 Lasers Mining amount 1164.35

High = 3xT1 Strips
Med = Viscoelastic EM Ward Salubrity I , Heat Dissipation Amp I , 'Benefactor' I Ward Reconstructor , 'Benefactor' I Ward Reconstructor
Low = Mining Laser Upgrade II , Local Hull Conversion Expanded Cargo I
Rigs = 2xCargohold Optimization I

Hold Size = 13489.5

Re: how many cycles

Posted: Wed May 06, 2009 3:09 am
by spesh
i do 9 @ 118seconds to fill 17199.1m3 (2x T2 cargo expanders 2x T1 cargo rigs)

I havent bothered optimising this much....yet :)

Re: how many cycles

Posted: Thu May 14, 2009 11:00 am
by rstark
I mine ice in a Mackinaw and i get 3.5 cycles done to fill up 14,000 m3. Of course 1 cycle for me is 334 seconds.

Re: how many cycles

Posted: Wed Jun 03, 2009 12:49 am
by guzzi75
For now, i am in retriever
2xT1
1x cap recharger
3x expander II
+ 3 rig cargo

=> ~5000m3 and 6 x80s (~930m3/T1/cycle)

I will try the 90s. I choosed 80s because of "depleted".

Re: how many cycles

Posted: Thu Jul 23, 2009 10:30 am
by Marker
6x 85 sec.
Maxed out skills, mining eveything and orca boosting (mining director lvl 4).

Re: how many cycles

Posted: Sun Jul 26, 2009 5:51 pm
by Drew6591
with rigs and expanders i do 116 sec 8x in a hulk with T1 strippers exumers 4 no gang bonuses and with the way 4.4 speeds things up it knocked 5 min of each run so it is 3 runs an hour 17,199 M3 each run not to bad